Dental Zirconia Sintering Paste, Zirconia Firing Paste, Anti-adhesion Sinter Paste
1000℃+ High Temperature Resistance |
Stable physical property under ultra-high sintering temperature, no decomposition, no impurity precipitation, won’t generate stains or gray pollution on zirconia surface. |
Excellent Adhesion Strength |
Tightly attach to zirconia contact surface, not easy to fall off during transportation and heating, keep complete isolation layer all through sinter process. |
Uniform Cotton-Like Texture |
Balanced moderate viscosity, smooth to squeeze out, no dripping or sagging on inclined inner crown wall. |
Easy Brushing & Simple Cleaning |
No resistance while coating with micro-brush; after sintering, residual powder can be fully removed by gentle brush without scratching zirconia. |
Anti-Adhesion & Anti-Crack Protection |
Isolate zirconia from sinter support, balance thermal expansion difference, prevent workpiece sticking, edge crack and bridge deformation during fast sinter. |
Zero Residue & Low Rework Rate |
No solid residue after high-temperature firing, keep natural original tooth shade of zirconia restoration, cut lab waste cost effectively. |
| 1 | Clean pre-sintered zirconia workpiece thoroughly, remove all cutting debris and air dry completely. |
| 2 | Extrude proper amount of Gusrom sintering paste, evenly coat thin layer on contact position between zirconia and sinter pin/tray. |
| 3 | Place coated restoration on sinter support naturally, wait 3–5 minutes for surface air-dry to boost adhesion. |
| 4 | Send tray into sinter furnace, run standard or fast sinter curve matched with your zirconia block. |
| 5 | Cool down fully after firing, sweep residual paste lightly with brush without scratching zirconia surface. |
| Brand | Gusrom |
| Product Name | Gusrom Dental Zirconia Sintering Paste |
| Specification | 10ml |
| Shelf Life | 3 years |
| Production Date | 2026.04.23 |
| Note | For other details, please refer to the instruction manual |
| A | High-translucency anterior zirconia veneers & aesthetic single crowns |
| B | Posterior multi-unit long bridges easy to crack at connector area |
| C | Fast-sinter zirconia restorations with rapid heating curve over 1000℃ |
| D | Full-arch monolithic zirconia prostheses for implant cases |
| E | Mass production dental labs to lower scrapping & rework cost |
A: Yes, the formula supports temperature above 1000℃, stable without decomposition during rapid high-temperature heating process.
A: Featured outstanding adhesion strength, tightly stick on zirconia surface, won’t fall off before sintering.
A: No solid residue remains, light brushing can clear all powder without damaging restoration surface.
A: Tightly seal syringe nozzle, store in cool dry place away from high temperature and direct sunlight to avoid drying failure.
GUSROM provides premium zirconia block, milling machines, and 3D scanning & printing technology for innovative CAD CAM dental solutions.
Room 503, Building 4, Yesun Pingshan Life And Health Technology Park, No. 19 Linhui Road, Jinsha Community, Kengzi Street, Pingshan District, Shenzhen
Copyright © Shenzhen Gusrom Biotechnology Co.,Ltd. All Rights Reserved Privacy Policy Blog
EN
